復健輔具設計與製造
Design & Manufacture of Rehabilitative Device
| 節 | 週四 |
|---|---|
2 09:00–09:50 | 復健輔具設計與製造 YEA205（陽明） 3 節連堂 |
3 10:10–11:00 | |
4 11:10–12:00 |
* 根據陽明交大上課時間表所列
As shown in Syllabus
教師未提供此項資料
無備註
To know the updated knowledge in rehabilitation Engineering and assistive aids To know the updated knowledge in rehabilitation Engineering and assistive aids
Homework 50%, Final 25%,Term project 25% Homework 50%, Final 25%,Term project 25%
教師未提供此項資料
| 週次 | 主題 |
|---|---|
| 第 1 週 | Introduction to Rehabilitation and Assistive technology |
| 第 2 週 | Mobility aids for the elderly |
| 第 3 週 | Ankle foot Biomechanics and orthoses |
| 第 4 週 | Lower limb Orthosis-Knee |
| 第 5 週 | Lower limb Orthosis-Hip |
| 第 6 週 | Term project proposal presentation and hands on 3D scanning. |
| 第 7 週 | Upper Limb Orthosis |
| 第 8 週 | Upper Limb Prosthesis |
| 第 9 週 | 3DP for- Orthosis and Prosthesis assessment and fabrication |
| 第 10 週 | Spinal Orthosis |
| 第 11 週 | Case Study on Orthosis- functional evaluation and assessment |
| 第 12 週 | Case Study on Prosthesis-functional evaluation and assessment |
| 第 13 週 | Site Visiting -Rehabilitation device |
| 第 14 週 | Wheelchair Design |
| 第 15 週 | Seating and Posture |
| 第 16 週 | Final Examination |
| 第 17 週 | Term project presentation |
| 第 18 週 | Term project presentation |
Bowker P, Condie DN Biomechanics basis of orthotics management, Butterworth-Heinemann, 1993 Shurr D. and Cook T. Prosthetics and Orthotics Lucas G. A primer of biomechanics, Springer verlag, New York, 1999 Wu,KK Foot orthoses, Williams and Wilkins, 1990 Bowker J.H. Atlas of limb prosthetics surgical prosthetic and rehabilitation principles, Mosby year book,1982 Braddom R.A. Physical medicine and rehabilitation, W.B. Saunders Co.1996
- 地點
- 教師未提供此項資料
- 時間
- 教師未提供此項資料
- 聯絡方式
- 教師未提供此項資料